laurence scott VB book

[onlinemelk]

Hello guys

I need this book

Professional Roulette Prediction: Volume 1 Basic Methods

the price is very high for buy , is anyone can help me to access this book ?

Highest Regards

[Steve]

Its good but the important parts can be summed up in a paragraph. There is enough free information to learn vb.

[onlinemelk]

so show me if exist ? 

[ego]

I would recommend Mastersroulette, you find a link to there 300$ PDF in the topic below.

link:s://forum.x/index.php?topic=1997.msg28791#msg28791

Cheers

[onlinemelk]

I would recommend Mastersroulette, you find a link to there 300$ PDF in the topic below.

link:s://forum.x/index.php?topic=1997.msg28791#msg28791

Cheers

Hello Lego

Thank you for response .

I had it already ,I can't understand it well , it's  not clear for me enough , I'm looking for better ebook .

I saw on the internet that laurence scott book is better of them . he speaks about ball speed clear that missed in others .

am I right ?

[ego]

I can show you in public ...

Download free metronome from google app store.
Make the setting vibrate with no sound and set it to vibrate once every second, 60 pbm.

Now search for a roulette wheel video on youtube, for example Bob Gordon Roulette Spins or Jafco or Mastersroulette or any other.

Instructions to predict when ball has around early or late 9 sec until drop, hitting deflector.
Estimate ball speed.

Each time you feel the metronome vibrate, watch what position that ball has on the ball track.
In the beginning you will see the ball at different place each time your metronome vibrate.

But during one moment you will see the ball in the same place during two vibrations.
In same place or very close to same place.

At this moment you will have early or late 9 seconds until ball drop into deflector.
Same for each and every spin.
You get 9 to 10 out of 10 predictions correct estimating ball speed that way.

This happens when you see ball in same place on the ball track during two vibrations.
Then ball goes from faster then 1 second to slower then 1 second, the breaking point.

What you do is that you read your reference number below reference deflector when ball has 9 second until drop.
See mastersroulette description about dominant drop zone.

This is superior method then LS crossover.

If they say No More Bets early you only change the time for the estimation process, for example 0.7 seconds.
  Thats it.

Rotor you just watch number below deflector when ball is over and take two, three vibrations and see how many pockets rotor travel.
Start to predict and play with same rotor speeds.

Cheers

[onlinemelk]

Thank you so much ego  it's very helpfull for me .

[denzie]

I can show you in public ...

Download free metronome from google app store.
Make the setting vibrate with no sound and set it to vibrate once every second, 60 pbm.

Now search for a roulette wheel video on youtube, for example Bob Gordon Roulette Spins or Jafco or Mastersroulette or any other.

Instructions to predict when ball has around early or late 9 sec until drop, hitting deflector.
Estimate ball speed.

Each time you feel the metronome vibrate, watch what position that ball has on the ball track.
In the beginning you will see the ball at different place each time your metronome vibrate.

But during one moment you will see the ball in the same place during two vibrations.
In same place or very close to same place.

At this moment you will have early or late 9 seconds until ball drop into deflector.
Same for each and every spin.
You get 9 to 10 out of 10 predictions correct estimating ball speed that way.

This happens when you see ball in same place on the ball track during two vibrations.
Then ball goes from faster then 1 second to slower then 1 second, the breaking point.

What you do is that you read your reference number below reference deflector when ball has 9 second until drop.
See mastersroulette description about dominant drop zone.

This is superior method then LS crossover.

If they say No More Bets early you only change the time for the estimation process, for example 0.7 seconds.
  Thats it.

Rotor you just watch number below deflector when ball is over and take two, three vibrations and see how many pockets rotor travel.
Start to predict and play with same rotor speeds.

Cheers

[Steve]

Yes if you use vb, you may as well use a thumper. It is still often illegal but yoid never get prosecuted for that because they cant prove it. Everyone has a phone.

Detecting the key revolution is easy.

But what happens if the rotor speed is significantly different in other spins? And what happens when ball deceleration changes? The solutions must be practical. Its where vb techniques fail. My best vb method uses angle correlation to adjust but it still takes skill.

[ego]

I have seen several solutions using rotor/ball combinations with angles and I don't see them being superior.
The method I show is superior as you almost never predict wrong and is the most stable solution.

  Problem with rotor/ball combination is that ball can cheat you at the very end with one more or one less rotation.
It has to do with ball deceleration patterns, but almost never happens when you only predict ball speed by itself with the method I mention above.

  Cheers

[Steve]

Ego as far as i can see what you explained doesn't include a method to adjust for rotor speed changes. That's the hardest part to adjust for. You could stick to same speed ranges in some conditions, but then you skip a lot of spins. Isolating speed is not superior to interpolation.

And even if the ball hits the same diamond, the travel time typically varies up to 1.5s anyway. Only a computer is precise enough to adjust for that. But comparing computers is unfair.

[denzie]

Steve....its one of the best things posted on this forum. Top 5 stuff for sure 

Thx Ego

[Steve]

Denzie, its good to see discussion about something that works. But im assuming you never read the pages on my site i linked to for you. Instead you kept asking for the next step.  What ego explained is actually just bare bones vb - basically the first step.

I would love to see discussion go further. Theres a lot more to it. Interpolation is basically projecting rotor orientation variation. There are a few ways to do it.

[denzie]

I would love to see discussion go further. Theres a lot more to it. Interpolation is basically projecting rotor orientation variation. There are a few ways to do it.

Me too. Lets learn something.
Btw Steve....a thumper or simular things....how many seconds after ball release you can bet ? Coz our time Window to nmb is very small.

Btw Steve...I like a real discusion. Ego got straight to the point. No links. Hope we can keep going further....this stuff is the real deal 

[Roulettebeater]

Sorry ego but you won't be able to gain an edge unless you find a way to measure rotor speed.

Don't underestimate rotor speed, it can influence the ball's drop drastically