The VB Lessons

[Jordan]

Hello Class

The lessons will have 3 Chapters

1)Predicting at the correct Revolution of the Ball.
a)The WHY?
b)HOW?

2)Rotor speed Calculation
a)The WHY?
b)HOW?

3)Picking the correct scatter of the ball


ps.We will not procced from the 1 chapter to the next until all of you have understood the previous chapters.

[weddings]

great! all at ears jordan!

[Twisteruk]

Brilliant !  

[Jordan]

1)Predicting at the correct Revolution of the Ball.

One of the factors that we need in a VB prediction is to be able to IDENTIFY the Correct revolution of the ball.
By "the correct revolution of the ball" we mean that in every spin we must be able to identify the same revolutions from the time of the prediction till the time that the  ball will hit the Dominiand Diamond.(and drop into the Rotor)

If we will observe the ball revolutions from the start of the spin ,we will see that the ball in every new REV it is slowing down until will hit the DD and drop in the Rotor.
Every wheel has a "knee point"

The Knee point is the point (between the Revs) that the ball will have a BIGGER AND MORE NOTICABLE DECLERATION.(than the other REVS that they seem to be almost the same in speed)
This is the key to tell you in which REV from the END you are....

The knee point in 1 wheel can be at the 3d or at the 4th or at the 5th or at the 6th rev etc.
We don't know where is the knee point until we will observe 10-20 spins to find out....

SO for example:

The spin starts and we observe the revs as they are going down till the end:

14th
13th
12
11
10
9
8  still the REVS seems very fast and without any particular noticable DECLERATION
...............................
7
6
5
4  -------) from the 5th to the 4th REV we observe a Bigger Decleration...SO THIS IS THE TIME THAT WE SAY "NOW" and we are counting the revs till the DD HIT!
3
2
1
0 DD HIT!

We we saw in that spin that the KNEE POINT was at the 4th REV of the end.....

(WE NEVER CARE OF HOW MANY REVS THE BALL WILL DO FROM THE START OF THE SPIN.....WE JUST CARE TO COUNT HOW MANY REVS WILL MAKE AT THE TIME THAT WE SAY "NOW" TILL THE TIME OF THE DD HIT....the "NOW" will be replaiced later with the moment of the prediction)

So if we will see that we are able to IDENTIFY the 4th rev in the next spins then it means that the 1st factor is OK(the correct rev)

The WHY we must always predict the SAME REVS TO THE END is because in order to make a VB prediction we must have ALWAYS the same REMAINING TIME for the ball to hit the DD.

Here is the link for you to test your skills in predicting the same rev in every spin....You must not be sad if you can t predict in EVERY SPIN PERFEVTLY....a 7/10 spins correct is giving a very good advantage.
In this wheel the DD is at 12 ocklcok and the knee point is at the 4th REV
A secret to be able to see the ball speeds(REV) better is that when the ball is starting slowing down to HOLD your BREATH in order for your BRAIN to have a better FOCUS.This is because when we don't breath all the sences of the brain are more SHARP(like the pain sences etc)
DO NOT FOLLOW with your eyes THE BALL as it is spinning around the ball track...this is a MISTAKE!
Just look at 12 ocklock and look at the ball with periferial VISION as it is passing again and again from the 12 ocklock point.....with that way you will be able to see the BIGGER SPEED DECLERATION.(meaning that the ball will have a BIGGER DELAY from the pasing of the 12 ocklcok and coming again to 12 ocklock)
link:://rouletteplace.com/index.php?topic=857.0


OK do tests on predicting the 4th rev and tell me the results.......
(Do not care about the Rotor and the numbers...this will be the next chapter lesson....just care about the ball revs for now)

ps. Later on you will all see that you will be making a lot more accurate predictions than the RC in the video which it consider to be the best RC!

[chrisbis]

Ball almost always exits the outer drum at the same point.

I counted 8 spins Revs after the knee point before the chap started to count how many spins Revs the ball took after he had observed that same knee point.

Also, you can hear the moment when the ball chances velocity and begins to decelerate.

Interesting mechanical device they where using to predict the drop/rotor land point.

The counter- Got one (17) spot on later, but was nearly always within 8-10 numbers of the predicted socket and the actually landing number.

[Jordan]

Man let the others come to your LEVEL...don't play the smart in the class
The only thing that you do it to confuse them....

and its not spins its REVS! !

[Bayes]

So how do you determine when you have a DD? I'm guessing you watch until you see a diamond get hit A times in B spins - but what should be A and B?

[Jordan]

Oh! I am sorry Bayes and people.
I thought that you already knew how we can see if a wheel is tilted.

So the answer is that in order to consider a wheel tilted the ball must hit the same D in a ratio of 4 of 10 spins at least. More is better ofcource  

But don't worry about it because I will also teach you How to take advantage of 2 Ds

So people HOW are you doing with your tests in Identifing the same Rev???

[Jordan]

I see that all of you started with great interest but when the practicing-testing started the interest is gone

If there is no interest please tell me to lock the thread.

[weddings]

I am getting the hang of it. Just need a few more practice. Look forward to the next lesson! Any way we can do this for online casinos?

[Bayes]

Yes, it takes a little practice, but I'm getting there. Please continue Jordan. 

[ego]

So people HOW are you doing with your tests in Identifing the same Rev???

9 to 10 out of 10 - is that ok Jordan ?
Would you say i am a good student ?

[Jordan]

We can t continue to the next lesson until all of you would have done practice and tell me their accuracy in predicting the 4th rev out  of this wheel.

Didn t we say that it must go step by step? Its the ONLY way!

I am glad that ego ,Bayes and weddings are practicing and are doing good.

yes ego 9 of 10 is very very nice! and in this wheel this is the acuracy rate that you must all have with practice.....later on we will move to a harder wheel

I am teaching you exactly as it should.....step by step ...easy wheel and then harder one.

I am waiting to see the posts of the other members too that showed interest and motivated me to start the lessons....

ps.weddings online Casino and VB is not possible to play.
But later on I will tell you about an online Casino to test your skills...but this will be only after you would have learned everything!

[Twisteruk]

Im doin ok thanx Jordan

Maybe not as good as 9/10 but around 8/10


Many thanx for your guidance !

[Jordan]

8-10 in your Level is quite good!
This means that in 8 of 10 spins you will be betting with a lot better advantagae than the disadvantage of the -2.7.
In the other 2 spins you will be playing with the classic -2.7.
It is natural...we can t have perfect pred in all the spins....and we can t have in every spin a perfect DD hit....But it doesn't matter....the advantage is still there
well done....keep practicing until all the members will post their results