[RELEASE] Flukey Luke - System 9 (bot/tracker)

[Robeenhuut]

I analyzed using Ophis tracker 18 sessions each consisting of 80 spins from airball in german casino. Based on FL recommendation regarding win goal n stop loss 5 sessions reached at least 40u in profit n 4 others hit 30-40u range (max 96u). 70u in minus happened in 2 games (min -132u)  In 16 sessions there was at some point positive balance. Half of sessions were at least over 30u in plus but 11 were down more than 40u. Played with win goal of 40u n stop loss of 70u 7 sessions would hit either and f stopped after 80 spins 11 other sessions would end in total of -159u. So overall result would be 5*40-2*70-159=-99u  With win goal of 30u overall result would be -18u.  Overall balance after all sessions played straight would be -241u. This is small sample but gives u some ideas.

regards

[Robeenhuut]

One more comment on my last post. This example of sessions shows u that chart showing how system works in large number of continuous spins is basically worthless unless it sinks like a russian submarine taking steady nosedive  U need 2 read it incorporating  win goal n stop-loss n broken down in real individual sessions. Here played straight each session 4 80 spins u end up with -241u but with win goal n stop-loss in one case u r only down 18u. In around 1500 spins a difference of 200+ units. U don't need any more arguments about why testing 4 gazilions of spins is pointless. Its lazy n doubting guy excuse.

[TwoCatSam]

I have four problems to report:

1.  The bot just plain stops!  I got through a series of 100 spins one time, but after that it just randomly stops.  After it places a bet, the cursor just stays on the "spin" box and nothing else happens.

2.  I cannot for the life of me get a progression to work.  No matter where I set the LLL  and  WWW, it always bets one unit.

3.  I cannot manually save the graphs.  The one time it went to 100 and restarted, it saved the graph.  When it just shuts down, it doesn't.

4.  How do you make it run to a certain profit/loss level and stop?  The one time it went to 100, it automatically started over.

Sam

Anyone, please!

[ophis]

1.  The bot just plain stops!  I got through a series of 100 spins one time, but after that it just randomly stops.  After it places a bet, the cursor just stays on the "spin" box and nothing else happens.

Did you setup global limits by mistake?
What does status say when it stops? (yellow text in bottom left)

2.  I cannot for the life of me get a progression to work.  No matter where I set the LLL  and  WWW, it always bets one unit.

which progression? please post screen shoot.

3.  I cannot manually save the graphs.  The one time it went to 100 and restarted, it saved the graph.  When it just shuts down, it doesn't.

Right click on graph and press save.

4.  How do you make it run to a certain profit/loss level and stop?  The one time it went to 100, it automatically started over.

Session and or Global limits in Config Form.

[seb coe]

Ophis, great bot! But it seems to me that you've used the wrong rule on when to stop betting. FL has clarified that we should not stop betting if you have 2 streets left even if you've made a loss. Most of the wins come in when there are 2 streets left. Please see his Reply #132. We should only stop betting and start new 1-12 line when we have only 1 street left which is the 12th street.

[ophis]

Ophis, great bot! But it seems to me that you've used the wrong rule on when to stop betting. FL has clarified that we should not stop betting if you have 2 streets left even if you've made a loss. Most of the wins come in when there are 2 streets left. Please see his Reply #132. We should only stop betting and start new 1-12 line when we have only 1 street left which is the 12th street.

....

There is only one street left here (the 12 street) You would not play here.
...
You could have a situation where there are 4 streets left and then 3 of them get knocked out leaving the 12 by itself. You would not play in this situation. (4-3=1)
...
It could jump from 3 streets left to just the 12 street and bypass 2 streets left. You would not play in this situation.

It was really my mistake in saying waiting for 2 streets left and then playing to the very next loss because you might not get 2 streets left as explained above.

The good news is we are getting there. All the little niggles are getting ironed out.

Thanks.

[TwoCatSam]

the bot stopped at 240 spins, down about 40u.  It always stops..........

No reason I can find for it to do this.

I need to make you a movie and show you what I'm doing.

Sam

[TwoCatSam]

this is what it looked like when it stopped

[TwoCatSam]

The settings I used

[ophis]

You can see yellow text saying "....spinning".

what happen is somehow it didint recognized that spinning had actually happened.
(did u cover casino window with smth?)

what to do to make it go further is:
make sure numbers spun in casino and in bot are the same.
if one number is missing in tracker then add it manually with keyboard.
then place required/any bets manually in casino and press spin by your self...
from this moment bot SHOULD take over.


if this will happened more often then make sure your flash for internet explorer is newest availible version and/or turn off hardware acceleration of flash
(righ click on casino table and find it in flash options)

SIDENOTE:
if u leave BANKROLL field empty it will apply all you got in casino.... this is only used if u got more money in casino and u want to limit your money at the table to lets day 25 euro or smth.

[jarabo002]

Hello Ophis. Thanks for your work

I think tere is a bug in SESSION PROGRESSION.

For example, if I choose:

After  L         modify base units by x 1 of base unit
After  WWW   modify base units by x -1 of base unit

And i have: 4 example:                                                   WLLLWWW WWW WWW WWWW

In the tracker, if the base unit is 1, the progression is:      1,2,3,4,4,4,4, 3, 2, 1,1,1,1,1,1,1
But the correct one must be:                                           1,2,3,4,4,4,4, 3,3,3, 2,2,2, 1,1,1, 1

However, the error in the progression may be beneficial, so we beg to remain as an option.

Thanks

Regards

[ophis]

Hello Ophis. Thanks for your work

I think tere is a bug in SESSION PROGRESSION.

For example, if I choose:

After  L         modify base units by x 1 of base unit
After  WWW   modify base units by x -1 of base unit

And i have: 4 example:                                                   WLLLWWW WWW WWW WWWW

In the tracker, if the base unit is 1, the progression is:      1,2,3,4,4,4,4, 3, 2, 1,1,1,1,1,1,1
But the correct one must be:                                           1,2,3,4,4,4,4, 3,3,3, 2,2,2, 1,1,1, 1

However, the error in the progression may be beneficial, so we beg to remain as an option.

Thanks

Regards

to get what u want you would have to put:
LWWW,LWWWWWW,LWWWWWWWWW

because if You have
WWW
WWWW
WWWWW
on each of those instances last 3 entries are WWW

same way if u want unit to rise only once after L (WLLLWWWW)
You can put "after WL make +1" instead of L

then it won't rise 3 times.

...i have noticed that typing such a long sequences can hang bot a bit for a while...
so maybe just type it somewhere else and copy/paste.

[TwoCatSam]

"(did u cover casino window with smth?)"

O

Nope, no smth!  I will try all suggestions and report back.

Sam

[Robeenhuut]

Anybody else testing it?

[Stepkevh]

I was reading in this forum about 2 weeks now and i found it was time register myself 

I'm testing the bot also and tested it few times yesterday in demo mode.
It runs fine in single zero mode and after 800 spins it gave me a profit of around 2000 units 

But in no zero wheel it has a bug.
When i want to use "session progression" (session limits activated) the system hangs directly after the first free spin.
It is because of the fact of the free spins the bot creates and these have no LW outcome.
And the bot needs L or W to know if it needs to do +1 or -1 unit.

Otherwise its a perfect bot in BV